Quick 2 Seal is a two part, flexible, quick curing waterproofing membrane designed for application to decks, roofs, pipe lining, walls and gutters. Ideal for substrates that require toughness, UV stability and a high degree of protection from water ingress. The product is especially suitable for wooden structures that require the highest level of weather protection and appearance.

2 Seal Primer is a solvent free two part tough, hard wearing primer that adheres to most substrates. Supplied at application viscosity (which can be adjusted with suitable solvents to allow for spray applications), it gives an extremely tough and flexible film. Because it uses a high performance polymer it is resistant to yellowing and age crazing. It has state of the art UV absorbers incorporated that assist in surface protection from the effects of sunlight. It is frequently used as an etch primer to ensure adhesion of subsequent coatings over areas with silicone or hydrophobic sealers.

Quick 2 Seal
Mix Part A and Part B separately for 2 minutes using a power mixer. Then pour Base (Part A) into the Hardener (Part B) insuring no product is left in the bottom of Part A. Mix both Part A and Part B together for 2 minutes or until even colour blend is visible. If introducing thinners add no more than 10%.

2 Seal Primer
Mix the Base (Part A) separately for 1 minute. Then pour the hardener (Part B) and the required thinners, in the Base (Part A). Mix them all together for 2 minutes using a power mixer. Add no more than 3L thinners on a full kit of 2 Seal Primer.