Concrete Repair
Application
Clean out all loose chunks or debris using a stiff broom or a leaf blower to achieve a sound surface to bond with. Make sure that area you’re going to repair is dry.
Pour the liquid in a bucket first, then add MG-KRETE and mix for 20 seconds.
Apply the mixture to the area that needs to be repaired
Coverage with a 22kg bag + liquid:
– 6mm depth = 4 square metre
– 25mm Depth = 1 square metre
-Volume can be increased by using a clean, dry ½’’ or less aggregate
-There is zero shrinkage
Dry time:
– 45 min = 18MPa
– 24 hours = 35MPa
– 7 days = 40MPa
– 28 days = 77MPa
Clean up used tools directly with water afterwards.