POTHOLE REPAIR
Application
EASY AS 1, 2, 3!
1. Clean out all loose chunks or debris using a stiff broom or blower to achieve a sound surface to bond to.
2. Place PAR in the hole in layers of 3 inches at a time and tamp the area until firm. The last layer of PAR is to be 25% higher than the finished level.
3. Compact the PAR with a tamper, roller or by driving over it until th desired level is obtained.
Done!
![pothole-repair-how-to-step-1-image-01 pothole repair](https://cohe.co.nz/wp-content/uploads/2019/09/pothole-repair-how-to-step-1-image-01-300x200.jpg)
![pothole-repair-how-to-step-2-image-01 pothole repair](https://cohe.co.nz/wp-content/uploads/2019/09/pothole-repair-how-to-step-2-image-01-300x200.jpg)
![pothole-repair-how-to-step-3-image-01 pothole repair](https://cohe.co.nz/wp-content/uploads/2019/09/pothole-repair-how-to-step-3-image-01-300x200.jpg)