
ALGAE, MOSS,
MOULD & LICHEN CONTROL
Cohe Moss and Mould Kill is a high strength, slow release cleaner designed to safely treat, remove and prevent moss, mould, mildew, lichen and algae growing on most hard surfaces.
An ideal “Spray-on and leave” solution for controlling moss, mould and algae. Can be used by itself or as a “preventative” program after water blasting.
It has a residual action that can prevent the activation of moss and mould spores for up to 12 months.
Moss & Mould Kill contains a special blend of biodegradable surfactants to ensure maximum product penetration for improved performance.
With a foaming base, it allows applicators to see where they have applied the product to ensure complete surface coverage.
COHE MOSS & MOULD KILL
COHE MOSS & MOULD KILL
$75.00 – $300.00
Almost anywhere, including Concrete, Pavers, Pool surrounds, Fibrolite, Timber, Outdoor Furniture, Astro-grass, Fibreglass, Canvas, iron/Colour steel, Weatherboard, etc
Application Videos
- Algae, Moss, Mould and Lichen Control
- Long-Lasting Action
- Foaming Base Formulation
- Chlorine Free
- Progressive Clean
Cohe Moss and Mould Kill will kill and prevent moss, mould, mildew, lichen and algae growing on most hard surfaces. An ideal “Spray-on and leave” solution for controlling moss, mould and algae. Can be used by itself or as a “preventative” program after water blasting. Has a residual action that can prevent the activation of moss and mould spores for up to 12 months. With a foaming base, it allows applicators to see where they have applied the product to ensure complete surface coverage.
Directions
For optimum initial application use at a ratio of 1:10 (100mls per litre, 10% solution) with cold potable water and a ratio of 1:20 (50mls per litre, 5% solution) for subsequent applications.Product to be applied at 500ml per m2 of diluted liquid. Spray onto surfaces, and leave. For best results allow a dry contact time of at least 3 hours. Most surfaces do not require rinsing although some aged painted surfaces may require a rinse to avoid streaking. Best applied first thing in the morning or last thing at night onto a cool surface to minimise evaporation with no rain expected for 12 hours.
TECHNICAL DATA & SAFETY INFO

Technical Data Sheet

Material Safety Data Sheet
Benefits
- Fast acting
- No scrubbing or pressure waterblasting required
- Can be used on a variety of surfaces
- Ideal as a preparation for pain, varnish and stain

How to Apply
- For optimum initial application use at a ratio of 1:10 (100ml per litre, 10% soln) with cold potable water and a ratio of 1:20 (50ml per litre, 5% soln) for subsequent applications. The product is to be applied at 500ml per m2 of diluted liquid spray.
- Apply with a pressure sprayer, spray on to surfaces and leave.
For best results, allow a dry contact time of at least 3 hours.
Most surfaces do not require rinsing although some aged painted surfaces may require a rinse to avoid streaking. - Best applied first thing in the morning or last thing at night on to a cool surface to minimise evaporation with no rain expected for 12 hours.